top of page
u-mask F1 podium.png

U-Mask®
creata pensando al pianeta

Vista su

Le mascherine disperse comportano rischi sociali e ambientali, sia a breve che a lungo termine

Mask polluted sea.png

Impatto dei prodotti usa e getta

Ambientale

Nel 2020, 1,56 miliardi di maschere usa e getta sono state gettate negli oceani di tutto il mondo, danneggiando la fauna marina

1.56

miliardi

Sociale

Un aumento dei rifiuti si traduce in un aumento della domanda di capacità dell’inceneritore

Economico

40

miliardi di dollari

Secondo il Programma delle Nazioni Unite per l’ambiente, si stima che i rifiuti delle mascherine costino 40 miliardi di dollari

Copertina_SkyTempesta_U-Mask.jpg

Coperta da brevetti di utilità internazionali, brevetti di design e copyright

UNA SCELTA BREVETTATA

Protezione sostenibile

Cosa succederebbe se…
La tua azienda potesse offrire a dipendenti e clienti un livello di protezione più elevato riducendo al contempo l’equivalente impronta di carbonio.

 

Questa è la risposta di U-Mask, superando i problemi causati dalle mascherine usa e getta.

Scelta dalle migliori aziende

*tutti i loghi visualizzati sono di proprietà esclusiva dei rispettivi proprietari.

** include clienti, partner e progetti di beneficenza.

Abstract Geometric Structure

9 motivi per scegliere U-Mask®

Sostenibile

L’impronta di carbonio equivalente (CFE) mensile calcolata per la produzione e l’utilizzo di U-Mask Model 2.2 è pari allo 0,21% e per U-Mask Model 3 è di 0,17 kg. Ad esempio, l’impronta di carbonio del Modello 3 su base mensile è solo il 4,4% della maschera FFP usa e getta media.

Ecologica

La sua cover in nylon riutilizzabile e non tossica è rigenerata al 100% dai rifiuti dell'oceano e delle discariche. Crea un rischio ambientale inferiore poiché ogni U-Mask 2.2 in media potenzialmente salva l’oceano da 50 maschere chirurgiche. U-Mask Model 3 in media salva l'oceano da 21 maschere FFP.

*Tutti i dati vengono calcolati internamente utilizzando il software Mobius.

Branding

La tua U-Mask è una potente risorsa di branding con il potenziale di migliorare la tua attività. Offriamo una vasta gamma di colori e tecniche di stampa in modo che U-Mask possa essere personalizzata in base all'immagine aziendale, garantendo che i dipendenti siano sempre fedeli al marchio. U-Mask fornisce alla tua azienda un aspetto elegante e uniforme.

Protezione

Mostra ai tuoi dipendenti che ci tieni. U-Mask contrasta il passaggio di microrganismi esterni e aerosol. Un principio attivo contenuto nell'esclusivo Biolayer® è in grado di rendere la maschera autoigienizzante e di prevenire la proliferazione batterica.

Ergonomica

U-Mask ha un design ergonomico brevettato per essere confortevole su qualsiasi forma del viso per la massima protezione grazie alla perfetta adesione.

Disponibile in 3 misure in entrambi i modelli.

Testata

Sia U-Mask Model 2.2 che Model 3 sono state testate seguendo le relative linee guida normative.

U-Mask è prodotta in Italia sulla linea di produzione proprietaria di U-Earth per garantire il miglior controllo di qualità possibile.

Produzione

Biometria

Uno degli aspetti più critici del grado di protezione di una maschera è la perfetta aderenza al viso. Sulla nostra APP PAZ è presente una funzione di biometria per rilevare qual è la dimensione giusta della U-Mask per l'utente.

Tracciamento AI U-Mask.png

Tracciamento AI

Fotografando l'etichetta, il set di dati corrispondente viene analizzato da un software di intelligenza artificiale per identificare e tracciare l'autenticità del tuo prodotto, confermando che la tua U-Mask è originale.

Recensioni

Abbiamo protetto le migliori aziende al mondo e consegnato direttamente oltre 1 milione di U-Mask in tutto il mondo. Non hai mai provato una U-Mask?

Sperimenta la protezione personale di livello superiore.

Puoi leggere le nostre oltre 13.000 recensioni su Trustiplot.

Trustpilot U-Earth_edited.jpg

U-Mask Model 2.2

Con stile e comfort superiori, è la scelta ideale per l'uso quotidiano, in viaggio o per incontrarsi in sicurezza con gli amici. Nel suo cuore, il Biolayer® contiene un principio attivo in grado di prevenire la proliferazione batterica. BFE (efficienza di filtrazione batterica): >99%. Sostenibile e riutilizzabile con un filtro che dura fino a 200 ore di uso continuativo.

U-Mask Model 3
FFP2

Un FFP2 riutilizzabile. La protezione ideale per ambienti professionali, sui mezzi pubblici o dove sono richiesti DPI (Dispositivi di Protezione Individuale) certificati. Il filtro interno include uno strato melt-blown di alta qualità che garantisce una protezione specifica contro le particelle sottili e le polveri più sottili senza compromettere comfort, design o sostenibilità. Il filtro interno è riutilizzabile e può essere lavato a mano fino a 20 volte, fino a 40°C.

Amata da tutti

Campioni e celebrità di diversi sport e settori cercano prestazioni combinate con stile, U-Mask ha venduto più di 1.000.000 di unità in 129 paesi.

U-Mask VIP collage

Test e certificazioni
di U-Mask

H2020-Seal-of-Excellence-2_edited.jpg

U-Mask® Model 2.

La U-Mask Model 2.2 è classificata come MD (dispositivo medico) di Classe 1, Tipo 2R nei paesi europei e venduta come maschera per uso generale nel resto del mondo.

 

-Mask Model 2.2 NON è registrato come DPI (Dispositivo di Protezione Individuale).

Premiata con il sigillo di eccellenza per progetto COVID-19 dall'UE

U-Maschera Modello 2.png
  • How many hours do the light bulbs last?
    The light bulbs last approx. 11,000 hours.
  • How long does U-Lamp take to disinfect the environment?
    U-Lamp is effective against microbes as soon as you turn it on, the longer it stays on the more microbes will be affected. Chamber tests have shown that it inactivates more than 97% of microbes in the air in 30 minutes.
  • How do I maintain it?
    The bulbs should be changed after 11,000 hours of use or after 1 year of daily use. Bulbs should not be touched with bare hands. If the bulbs need to be changed, please contact us.
  • Is it safe?
    The U-Lamp provides filtered germicidal properties to reduce harmful virus and bacteria while people are in the room without posing any health risk when used within the current exposure limits recommended. The U-Lamp produces no harmful UV radiation or wasteful visible light and infrared light. These are the recommendations:
  • Does U-Lamp produce Ozone (O3)?
    No, U-Lamp does not produce relevant amounts of Ozone.
  • What does Sensor-X measure?
    Sensor-X measures 5 parameters: Temperature Humidity CO2 TVOCs PM2.5 It will also provide you with a score (AQI = Air Quality Index) evaluating the Air Quality in the location where it is placed. This score is calculated by considering exclusively pollutants affected by the AIRcel, that is: TVOCs and PM2.5. Other parameters (Temperature, Humidity and CO2) are monitored and evaluated on the basis of international standards, but do not impact on the AQI.
  • Where can I check the values of these parameters and the Air Quality score?
    You can either check them locally in your SensorX, or on your dashboard. You can also use the App.
  • What should I do when a certain value is too high or too low?
    We will send you a notification providing you with a suggestion on how to proceed. For example, if the CO2 value is too high, most probably we will suggest that you open the window.We will send you a notification providing you with a suggestion on how to proceed. For example, if the CO2 value is too high, most probably we will suggest that you open the window.
  • How should I interpret my Air Quality score?
    If 0≤score≤20 the air quality is very good and the light on the screen will be GREEN. If 21≤score≤40 the air quality is ok, but could be better. The light on the screen will be YELLOW. If 41≤score≤100 then the air quality is quite bad. The light will be RED. The same COLOUR-CODING applies to every single parameter according to different thresholds (depending on the parameter itself).
  • What’s the difference between the “Reboot” and “Factory Reset” buttons?
    The "Reboot" button will restart the device and finalise any modification to its Wi-Fi credentials after the installation. The "Factory Reset" button will bring SensorX to its initial out-of-the-box parameters and settings. ATTENTION PLEASE: be aware that this will also delete all connection configurations!
  • Summary of Test Results
    For a full summary of the test results of U-Mask Model 3, please email info@u-earth.eu
  • EU Declaration of Conformity Norm EN 149:2001+A1:2009
    Download the preview of the certificate here To request the full certificate for a specific production batch, please email support@u-earth.store
  • How often does the sensor transmit air quality data?
    The Sensor-X monitor transmits air quality data to the IoT dashboard every 5 minutes.
  • Where should Sensor-X be placed?
    A U-Earth Air Quality Specialist will let you know how many monitors you may need for your environment and the ideal position for each one. Sensor-X should be placed on any flat surface. We have developed a version that can hang on a wall as well.
  • What should be done if one of the indicators turns red?
    Sensor-X will display a quick fix to solve the problem immediately. In any case, our Air Quality Specialists will be able to analyse the air quality data and give you more in-depth guidance.
  • How is Sensor-X connected to the dashboard?
    The sensor collects data locally and is connected to the IoT Air Quality Dashboard via Wi-Fi. You will need Bluetooth only for the setup process.
  • How do I set up Sensor-X?
    Sensor-X can be easily set up through the IoT Air Quality App, which you’ll receive access to after becoming a Pure Air Zone customer.
  • Bacterial Filtration Efficiency BFE, IN --> OUT (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the inside to the outside of the mask (UNI EN 14683:2019). Result: 99.89%
  • Bacterial Filtration Efficiency BFE, OUT --> IN (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the outside to the inside of the mask (UNI EN 14683:2019). Result: 99.88%
  • Particle Filtration Efficiency PFE (%)
    Evaluates the nonviable particle retention or filtration efficiency of masks, usually at sub-micron levels (ASTM F2299 / F2299M). Result: 99.3% at 0.1 micron
  • Biocompatibility and Toxicological Biolayer® Test
    Checks for the absence of negative or unwanted side effects generated by the materials used to build the mask (allergies, redness, irritation, toxicity, etc.) (ISO 10993-1:2018). Result: passed
  • Bioburden (CFU/g)
    An assessment of the absence of a population of viable microorganisms on the mask and / or packaging (UNI EN 14683:2019) Result: 7,3 CFU/g
  • Breathability after 200h in vivo (Pa/cm^2)
    It is aimed at determining the air permeability of the mask; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: 43.4 Pa/cm^2
  • Antibacterial Activity on Biolayer® after aging (Staphylococcus aureus and Klebsiella pneumoniae)
    States the difference of the infectivity titer of bacteria found on an antibacterial-treated product compared to an untreated product after inoculation with and contact to bacteria, after materials are aged (ISO 20743:2013) Result: 99.797% and 99.861%
  • Splash Test after 200 hours in vivo
    Detects the resistance of the mask to the penetration of blood splatters or synthetic liquids; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: passed
  • Bacterial Filtration Efficiency BFE, IN --> OUT after 200h In vivo (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the inside to the outside of the mask; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: 99.89%
  • Antiviral Activity on Biolayer® (Human Coronavirus 229E)
    States the difference of the infectivity of the virus found on an antiviral-treated internal Biolayer® compared to an untreated Biolayer® after inoculation with and contact to the virus (ISO 18184:2013). Result: 99.90%
  • Antibacterial Activity on Biolayer® (Staphylococcus aureus and Klebsiella pneumoniae)
    States the difference of the infectivity titer of bacteria found on an antibacterial-treated product compared to an untreated product after inoculation with and contact to bacteria (ISO 20743:2013). Result: 99.995% and 99.959%
  • Breathability (Pa/cm^2)
    Aimed at determining the air permeability of the mask (UNI EN 14683:2019). Result: 57,8 Pa/cm^2
  • Splash Test (kPa)
    Detects the resistance of the mask to the penetration of blood splatters or synthetic liquids (UNI EN 14683:2019). Result: passed
  • How does the biometric feature on the app work?
    Click on the profile section of within the app, select your nose type and then center your face in the mask image. We will tell you which size U-Mask is best for you.
  • How can I add my company on the app?
    To be featured on the map, you must become a Pure Air Zone; each Pure Air Zone is entitled to a dedicated page on the Pure Air Zone app.
  • Do the badges correspond to any prizes?
    Yes! We are preparing a series of prizes depending on the points/badges acquired. The rewards will cover both the U-Earth ecosystem and that of our partners.
  • What do you base the lowest pollution calculation on in a Pure Air Zone?
    Pollution in a Pure Air Zone is assessed by comparing concentrations of the most common measurable indoor pollutants (typically PM2.5 and TVOCs) with multiple international standards.
  • There are no Pure Air Zones in my area.
    We are adding new Pure Zones week by week. The next one could be right next to you, so keep checking the app! Meanwhile you can suggest the ones you would like. Just in the MAP section and click SUGGEST ONE.
  • How do I activate the app?
    You can download the app from the Apple or Android app stores and then proceed with registration
  • Why did you only add meditations with Theta and Gamma waves (and not Beta, Alpha and Delta)?
    We chose these two waves taking into account the effects they can provide with just 10 minutes of meditation. Theta waves can bring a deep state of relaxation and simultaneously stimulate creativity. Gamma waves, being in the higher frequency, stimulate memory and improve learning abilities.
  • I cannot click on links in articles. What can I do?
    Links in articles are clickable, they work by 'double-tapping' or by holding down on them.
  • I cannot scan my face. What should I do?
    Make sure that you hold the camera steady, that you are in a suitably lit place and that you centre the silhouette over your face. The camera should be positioned approximately 20 cm away from your face.
  • What is the Pure Air Zone Index?
    The Pure Air Zone Index (PAZ Index) quantifies the impact of one or more Pure Air Zones in decontaminating the air. It is based on several factors: the running time of the AIRcel calculated from its installation as well as the number and the power of the individual models installed. This index is constantly updated over time as the amount of air purified by the devices themselves increases. In each Pure Air Zone on the map there is an explanation of the PAZ Index with the formula to calculate it.
  • What is the ESGverse that I can see on the Profile page?
    ESGverse is a 3D web application in which people can explore the Pure Air Zone concept in an immersive and interactive way and in which U-Earth's partner companies and customers can show a 3D experience of their projects within a sustainability meta-verse.
  • How often does the device need maintenance i.e. deep cleaning?
    It is usually recommended to carry out deep cleaning maintenance of the device every 4 months; however, in environments with heavier contaminants (e.g. laboratories, dental labs, etc.), it is recommended to run the maintenance every 3 months.
  • How often should I add U-Ox?
    It is necessary to add the contents of a bottle of U-Ox once a month.
  • How often do I need to add water?
    Usually once a week. However, if the device has just been installed in an environment which has never been previously treated with our AIRcel, a weekly check is most likely not enough as the bio-oxidation process generated by the elimination of the captured contaminants can produce a slight water heating which consequently causes its consumption. Therefore, please keep a constant eye on the water level for the first 2 weeks.
  • What happens if I forget to add the U-Ox on the set day?
    The life of the biomass contained in each bottle, once added to the bioreactor water, is about 35 days, after which it loses its effectiveness. Failure to insert a new bottle would therefore make the device lose some of its purification effectiveness.
  • What type of water am I supposed to use?
    It is suggested to use only tap water. Water must be at room temperature and not too hot.

Test eseguiti

H2020-Seal-of-Excellence-2_edited.jpg

U-Mask® Model 3

U-Mask Model 3 è una maschera FFP2 RD. È certificata come DPI (dispositivi di protezione individuale) riutilizzabili di categoria III conforme alla norma EN 149:2001 + A1:2009

 

U-Mask Model 3 NON è registrata come dispositivo medico

Premiata con il sigillo di eccellenza per progetto COVID-19 dall'UE

U-Maschera Modello 3.png
  • How many hours do the light bulbs last?
    The light bulbs last approx. 11,000 hours.
  • How long does U-Lamp take to disinfect the environment?
    U-Lamp is effective against microbes as soon as you turn it on, the longer it stays on the more microbes will be affected. Chamber tests have shown that it inactivates more than 97% of microbes in the air in 30 minutes.
  • How do I maintain it?
    The bulbs should be changed after 11,000 hours of use or after 1 year of daily use. Bulbs should not be touched with bare hands. If the bulbs need to be changed, please contact us.
  • Is it safe?
    The U-Lamp provides filtered germicidal properties to reduce harmful virus and bacteria while people are in the room without posing any health risk when used within the current exposure limits recommended. The U-Lamp produces no harmful UV radiation or wasteful visible light and infrared light. These are the recommendations:
  • Does U-Lamp produce Ozone (O3)?
    No, U-Lamp does not produce relevant amounts of Ozone.
  • What does Sensor-X measure?
    Sensor-X measures 5 parameters: Temperature Humidity CO2 TVOCs PM2.5 It will also provide you with a score (AQI = Air Quality Index) evaluating the Air Quality in the location where it is placed. This score is calculated by considering exclusively pollutants affected by the AIRcel, that is: TVOCs and PM2.5. Other parameters (Temperature, Humidity and CO2) are monitored and evaluated on the basis of international standards, but do not impact on the AQI.
  • Where can I check the values of these parameters and the Air Quality score?
    You can either check them locally in your SensorX, or on your dashboard. You can also use the App.
  • What should I do when a certain value is too high or too low?
    We will send you a notification providing you with a suggestion on how to proceed. For example, if the CO2 value is too high, most probably we will suggest that you open the window.We will send you a notification providing you with a suggestion on how to proceed. For example, if the CO2 value is too high, most probably we will suggest that you open the window.
  • How should I interpret my Air Quality score?
    If 0≤score≤20 the air quality is very good and the light on the screen will be GREEN. If 21≤score≤40 the air quality is ok, but could be better. The light on the screen will be YELLOW. If 41≤score≤100 then the air quality is quite bad. The light will be RED. The same COLOUR-CODING applies to every single parameter according to different thresholds (depending on the parameter itself).
  • What’s the difference between the “Reboot” and “Factory Reset” buttons?
    The "Reboot" button will restart the device and finalise any modification to its Wi-Fi credentials after the installation. The "Factory Reset" button will bring SensorX to its initial out-of-the-box parameters and settings. ATTENTION PLEASE: be aware that this will also delete all connection configurations!
  • Summary of Test Results
    For a full summary of the test results of U-Mask Model 3, please email info@u-earth.eu
  • EU Declaration of Conformity Norm EN 149:2001+A1:2009
    Download the preview of the certificate here To request the full certificate for a specific production batch, please email support@u-earth.store
  • How often does the sensor transmit air quality data?
    The Sensor-X monitor transmits air quality data to the IoT dashboard every 5 minutes.
  • Where should Sensor-X be placed?
    A U-Earth Air Quality Specialist will let you know how many monitors you may need for your environment and the ideal position for each one. Sensor-X should be placed on any flat surface. We have developed a version that can hang on a wall as well.
  • What should be done if one of the indicators turns red?
    Sensor-X will display a quick fix to solve the problem immediately. In any case, our Air Quality Specialists will be able to analyse the air quality data and give you more in-depth guidance.
  • How is Sensor-X connected to the dashboard?
    The sensor collects data locally and is connected to the IoT Air Quality Dashboard via Wi-Fi. You will need Bluetooth only for the setup process.
  • How do I set up Sensor-X?
    Sensor-X can be easily set up through the IoT Air Quality App, which you’ll receive access to after becoming a Pure Air Zone customer.
  • Bacterial Filtration Efficiency BFE, IN --> OUT (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the inside to the outside of the mask (UNI EN 14683:2019). Result: 99.89%
  • Bacterial Filtration Efficiency BFE, OUT --> IN (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the outside to the inside of the mask (UNI EN 14683:2019). Result: 99.88%
  • Particle Filtration Efficiency PFE (%)
    Evaluates the nonviable particle retention or filtration efficiency of masks, usually at sub-micron levels (ASTM F2299 / F2299M). Result: 99.3% at 0.1 micron
  • Biocompatibility and Toxicological Biolayer® Test
    Checks for the absence of negative or unwanted side effects generated by the materials used to build the mask (allergies, redness, irritation, toxicity, etc.) (ISO 10993-1:2018). Result: passed
  • Bioburden (CFU/g)
    An assessment of the absence of a population of viable microorganisms on the mask and / or packaging (UNI EN 14683:2019) Result: 7,3 CFU/g
  • Breathability after 200h in vivo (Pa/cm^2)
    It is aimed at determining the air permeability of the mask; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: 43.4 Pa/cm^2
  • Antibacterial Activity on Biolayer® after aging (Staphylococcus aureus and Klebsiella pneumoniae)
    States the difference of the infectivity titer of bacteria found on an antibacterial-treated product compared to an untreated product after inoculation with and contact to bacteria, after materials are aged (ISO 20743:2013) Result: 99.797% and 99.861%
  • Splash Test after 200 hours in vivo
    Detects the resistance of the mask to the penetration of blood splatters or synthetic liquids; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: passed
  • Bacterial Filtration Efficiency BFE, IN --> OUT after 200h In vivo (%)
    A measurement of a mask material's resistance to penetration of bacteria, from the inside to the outside of the mask; performed on masks that have been used for 200 hours (UNI EN 14683:2019). Result: 99.89%
  • Antiviral Activity on Biolayer® (Human Coronavirus 229E)
    States the difference of the infectivity of the virus found on an antiviral-treated internal Biolayer® compared to an untreated Biolayer® after inoculation with and contact to the virus (ISO 18184:2013). Result: 99.90%
  • Antibacterial Activity on Biolayer® (Staphylococcus aureus and Klebsiella pneumoniae)
    States the difference of the infectivity titer of bacteria found on an antibacterial-treated product compared to an untreated product after inoculation with and contact to bacteria (ISO 20743:2013). Result: 99.995% and 99.959%
  • Breathability (Pa/cm^2)
    Aimed at determining the air permeability of the mask (UNI EN 14683:2019). Result: 57,8 Pa/cm^2
  • Splash Test (kPa)
    Detects the resistance of the mask to the penetration of blood splatters or synthetic liquids (UNI EN 14683:2019). Result: passed
  • How does the biometric feature on the app work?
    Click on the profile section of within the app, select your nose type and then center your face in the mask image. We will tell you which size U-Mask is best for you.
  • How can I add my company on the app?
    To be featured on the map, you must become a Pure Air Zone; each Pure Air Zone is entitled to a dedicated page on the Pure Air Zone app.
  • Do the badges correspond to any prizes?
    Yes! We are preparing a series of prizes depending on the points/badges acquired. The rewards will cover both the U-Earth ecosystem and that of our partners.
  • What do you base the lowest pollution calculation on in a Pure Air Zone?
    Pollution in a Pure Air Zone is assessed by comparing concentrations of the most common measurable indoor pollutants (typically PM2.5 and TVOCs) with multiple international standards.
  • There are no Pure Air Zones in my area.
    We are adding new Pure Zones week by week. The next one could be right next to you, so keep checking the app! Meanwhile you can suggest the ones you would like. Just in the MAP section and click SUGGEST ONE.
  • How do I activate the app?
    You can download the app from the Apple or Android app stores and then proceed with registration
  • Why did you only add meditations with Theta and Gamma waves (and not Beta, Alpha and Delta)?
    We chose these two waves taking into account the effects they can provide with just 10 minutes of meditation. Theta waves can bring a deep state of relaxation and simultaneously stimulate creativity. Gamma waves, being in the higher frequency, stimulate memory and improve learning abilities.
  • I cannot click on links in articles. What can I do?
    Links in articles are clickable, they work by 'double-tapping' or by holding down on them.
  • I cannot scan my face. What should I do?
    Make sure that you hold the camera steady, that you are in a suitably lit place and that you centre the silhouette over your face. The camera should be positioned approximately 20 cm away from your face.
  • What is the Pure Air Zone Index?
    The Pure Air Zone Index (PAZ Index) quantifies the impact of one or more Pure Air Zones in decontaminating the air. It is based on several factors: the running time of the AIRcel calculated from its installation as well as the number and the power of the individual models installed. This index is constantly updated over time as the amount of air purified by the devices themselves increases. In each Pure Air Zone on the map there is an explanation of the PAZ Index with the formula to calculate it.
  • What is the ESGverse that I can see on the Profile page?
    ESGverse is a 3D web application in which people can explore the Pure Air Zone concept in an immersive and interactive way and in which U-Earth's partner companies and customers can show a 3D experience of their projects within a sustainability meta-verse.
  • How often does the device need maintenance i.e. deep cleaning?
    It is usually recommended to carry out deep cleaning maintenance of the device every 4 months; however, in environments with heavier contaminants (e.g. laboratories, dental labs, etc.), it is recommended to run the maintenance every 3 months.
  • How often should I add U-Ox?
    It is necessary to add the contents of a bottle of U-Ox once a month.
  • How often do I need to add water?
    Usually once a week. However, if the device has just been installed in an environment which has never been previously treated with our AIRcel, a weekly check is most likely not enough as the bio-oxidation process generated by the elimination of the captured contaminants can produce a slight water heating which consequently causes its consumption. Therefore, please keep a constant eye on the water level for the first 2 weeks.
  • What happens if I forget to add the U-Ox on the set day?
    The life of the biomass contained in each bottle, once added to the bioreactor water, is about 35 days, after which it loses its effectiveness. Failure to insert a new bottle would therefore make the device lose some of its purification effectiveness.
  • What type of water am I supposed to use?
    It is suggested to use only tap water. Water must be at room temperature and not too hot.

Certificazioni

bottom of page